DriTac Introduces New & Improved MCS 7000, Two-Part Epoxy, Concrete Moisture Control System
August 2018 - DriTac Flooring Products, LLC has launched a new and improved, “green” concrete moisture control system that dramatically reduces the rate of harmful moisture vapor emissions up to 100% relative humidity (RH) and 25 lbs. down to levels accepted by most flooring manufacturers, prior to the installation of wood, resilient, carpet tile and all floating floors.
Manufactured in the USA, DriTac New & Improved MCS 7000 consists of a two-component epoxy (Component A (1-gal) and Component B (.79 gal)), which are mixed to form a coating that is applied to the surface of the concrete subfloor. The system offers a superior perm rating and enhanced moisture warranty when used with approved DriTac flooring adhesives for residential and commercial applications.
This easy-to-mix and apply formula allows for same-day installations with a 6-hour cure time. New & Improved MCS 7000 can be roller, squeegee or trowel applied with a coverage rate of 300-350 square feet/mixed unit. It is easy to clean when wet and colored green for easy identification. This user-friendly solution can also serve to isolate old cutback adhesive residue.
This premium-grade moisture control system has been certified by the Carpet and Rug Institute’s Green Label Plus Program for Indoor Air Quality. It touts DriTac’s “green” certification, designated for flooring installation solutions that contain zero VOC and zero solvents. New & Improved MCS 7000 also helps contribute to LEED credits, will not promote the growth of mold and has low odor.
DriTac Flooring Products, LLC is celebrating over 60 years as one of the most experienced manufacturers of environmentally friendly flooring installation solutions in the market. DriTac is committed to manufacturing sustainable products for the flooring industry with a comprehensive line of premium “green” zero VOC and zero solvent adhesives and installation products that help contribute points towards LEED certification. For more information or to receive a complete DriTac product guide, contact: John Lio, 60 Webro Road Clifton, N.J. 07012; Ph: 973-614-9000 ext. 243; e-mail: jlio@DriTac.com; or Web: www.DriTac.com.
June 2020 - DriTac Flooring Products, LLC has launched DriTac 8801 CoverGuard, a premium-grade 1.85mm semi-ridged foam that provides scratch and dent protection for newly installed floors and existing surfaces to prevent...read more
September 2019 - DriTac Flooring Products, LLC has launched DriTac 2000 Vertical, a polymer-based adhesive designed for interior wall applications. This instant grab adhesive provides superior bond strength for...read more
June 2019 – DriTac Flooring Products is introducing the 8400 EnviroTread series, a line of sustainable green, acoustical abatement recycled rubber flooring underlayment, made from post-consumer and...read more
November 2018 - DriTac Flooring Products, LLC has launched a “green”, single-component acrylic floor primer for interior use on various approved substrates, including concrete, wood, light-weight concrete and...read more
July 2018 - DriTac Flooring Products, LLC has announced a new distribution partnership in the United Kingdom with Introducing Interiors Ltd, an importer of interior design installation products with...read more