DriTac Introduces: 8801 CoverGuard, Hard Surface Protective Foam
June 2020 - DriTac Flooring Products, LLC has launched DriTac 8801 CoverGuard, a premium-grade 1.85mm semi-ridged foam that provides scratch and dent protection for newly installed floors and existing surfaces to prevent damage during and after the installation process. CoverGuard is scored and breathable, allowing sub-surface moisture to pass through. It restricts surface spills and water spots on the top of the film surface, protecting surfaces from stains, oils and chemicals.
CoverGuard protects concrete, wood, tile, stone, linoleum, LVT, WPC, countertops, furniture, and most other floor types. Unlike lower-grade and thinner floor protection material, 8801 combines 1mm of grooved foam technology fused together with a smooth-surface film layer. This dramatically adds to the gauge thickness and layer of armored defense for all surfaces, including a high resistance to tears and punctures. CoverGuard is designed to remain flush to the floor to help prevent the risk of tripping or falling on the floor.
DriTac has manufactured American-made, full-spread wood and resilient flooring adhesives for over 60 years. DriTac’s extensive experience in producing innovative, premium-grade flooring installation solutions led directly to the introduction of this scratch and dent protector for valued flooring installations.
CoverGuard is VOC compliant and can be installed in four easy steps: clean, roll, connect and tape. It is available in 800 sq. ft. rolls. CoverGuard is reusable, roll it up and transport it to the next job.
DriTac Flooring Products, LLC is celebrating over 60 years as one of the most experienced manufacturers of environmentally friendly flooring installation solutions in the market. DriTac is committed to manufacturing sustainable products for the flooring industry with a comprehensive line of premium “green” zero VOC and zero solvent adhesives, underlayment and flooring installation solutions that help contribute points towards LEED certification. For more information or to receive a complete DriTac product guide, contact: John Lio, 60 Webro Road Clifton, N.J. 07012; Ph: 973-614-9000 ext. 243; e-mail: jlio@DriTac.com; or Web: www.DriTac.com.
August 2020 - DriTac Flooring Products, LLC has named David Clarkson President. Clarkson has held numerous positions with DriTac since 2003, most recently as Senior Vice-President – Sales. He has held key positions in the flooring industry for the past 30 years including...read more
September 2019 - DriTac Flooring Products, LLC has launched DriTac 2000 Vertical, a polymer-based adhesive designed for interior wall applications. This instant grab adhesive provides superior bond strength for...read more
June 2019 – DriTac Flooring Products is introducing the 8400 EnviroTread series, a line of sustainable green, acoustical abatement recycled rubber flooring underlayment, made from post-consumer and...read more
November 2018 - DriTac Flooring Products, LLC has launched a “green”, single-component acrylic floor primer for interior use on various approved substrates, including concrete, wood, light-weight concrete and...read more