Versadek Industries
Call
- Fax: 408-532-6193
- Toll Free: 800-497-3325
Write
- Versadek Industries
- Box 730743
- San Jose, CA 951730743
- United States of America
Online
The VersaDek System is composed of two components: VersaDek vinyl wear layer and the VersaDek Adhesive sealant.
The vinyl wear layer has a needlepunch polyester backing extruded into it during the texturing process. This backing reinforces both the vinyl and adhesive layers.
The VersaDek adhesive is both an adhesive and sealant which assists the vinyl wear layer in waterproofing the surface. The adhesive is troweled on and achieves and incredible grip on wood, concrete, and most other building materials – even some types of ceramic tile. The VersaDek system cannot be installed directly over asphaltic-based products.
When the VersaDek system is properly installed you have a sandwich structure composed of the substrate, a 40 mil layer of adhesive/sealant reinforced with the polyester backing, and the VersaDek wear layer of 33 mils also reinforced with the polyester backing.
Seams are accomplished using either the overlap heat weld seam or the cold weld butt seam (depending on the installation). All edges are sealed using ultra-violet (UV) resistant calking.
Uses
VersaDek vinyls have been in use for over 20 years in climates ranging from deserts to near Arctic conditions. Our vinyl is designed to take the abuse of daily use and yet maintain its good looks without shrinking or cracking.
VersaDek vinyl is the ideal covering for decks, balconies, patios, entries, walkways, and around hot tubs and swimming pools. VersaDek vinyl is also an excellent choice for use on stairs, ramps, boat mooring docks and wharfs! Wherever there is a need for a durable surface covering, VersaDek vinyl is the answer.
With its tough PVC wear layer of 33 mils and richly textured surface. VersaDek vinyl offers both effective waterproofing and decorative appeal. Our vinyl is available in 4 colors sure to please the most discriminating decorators.
The vinyl wear layer has a needlepunch polyester backing extruded into it during the texturing process. This backing reinforces both the vinyl and adhesive layers.
The VersaDek adhesive is both an adhesive and sealant which assists the vinyl wear layer in waterproofing the surface. The adhesive is troweled on and achieves and incredible grip on wood, concrete, and most other building materials – even some types of ceramic tile. The VersaDek system cannot be installed directly over asphaltic-based products.
When the VersaDek system is properly installed you have a sandwich structure composed of the substrate, a 40 mil layer of adhesive/sealant reinforced with the polyester backing, and the VersaDek wear layer of 33 mils also reinforced with the polyester backing.
Seams are accomplished using either the overlap heat weld seam or the cold weld butt seam (depending on the installation). All edges are sealed using ultra-violet (UV) resistant calking.
Uses
VersaDek vinyls have been in use for over 20 years in climates ranging from deserts to near Arctic conditions. Our vinyl is designed to take the abuse of daily use and yet maintain its good looks without shrinking or cracking.
VersaDek vinyl is the ideal covering for decks, balconies, patios, entries, walkways, and around hot tubs and swimming pools. VersaDek vinyl is also an excellent choice for use on stairs, ramps, boat mooring docks and wharfs! Wherever there is a need for a durable surface covering, VersaDek vinyl is the answer.
With its tough PVC wear layer of 33 mils and richly textured surface. VersaDek vinyl offers both effective waterproofing and decorative appeal. Our vinyl is available in 4 colors sure to please the most discriminating decorators.