Convenient solutions
Easy & quick
Install a water feature without major plumbing work.
Wherever you want
Create or renovate a water feature, even without gravity drainage.
Quiet
SFA Saniflo offers the quietest range of macerators and pumps on the market.
Economical
Water-saving solutions for both your wallet and the environment.
Design and Elegance
Solutions crafted to blend seamlessly with your interior.
Buy with confidence
Performance and Reliability
Technologies and materials that ensure efficiency and longevity.
Warranty Extension
Up to 4 years warranty.
Experts Since 1958
Creator of the macerating toilet.
Tailored Support
Our team of experts is at your service.
Made in France
Many products have received the Made in France label.
All of Saniflo products are designed to pump out the waste into a city sewer, septic tank or soil stack.
Depending on the pump model, the discharge pipe can be 3/4 or 1 inch diameter pipe. The Sanicubic range uses 1-1/2" diameter discharge pipe.
It is not recommended to use an air admittance valve or a mechanical spring-loaded device as they only allow air to flow one way.
Maintenance is not required for any of our products. However, we recommend the use Saniflo's Descaler which acts as a cleanser and descaler.
A macerating pump is designed to handle the flush of human waste and toilet paper only (Sanitop, Saniaccess3, Saniplus, Sanipro, Sanipack, Sanicompact and Sanistar).
A grinder pump is designed to handle the flush of human waste, toilet paper and sanitary napkins such as feminine hygiene products (Sanibest Pro, Sanigrind Pro, Sanicubic 1 and Sanicubic 2).
Saniflo recommends to use PVC, CPVC, copper.
All of Saniflo products require an 1-1/2 inch vent pipe, which must be vented to the main vent stack as per plumbing codes. The Sanicompact 48 and Sanistar models do not require a vent connection since they are considered self contained units.
It is not recommended to use an air admittance valve or a mechanical spring-loaded device as they only allow air to flow one way.
All of our products come with a plug power cord and requires 115 volts. They must be plugged into a GFI receptacle which does not have to be a dedicated circuit. The Sanicubic 2 requires 220/240 volts and must be hard wired.
All of Saniflo products are designed to pump out the waste into a city sewer, septic tank or soil stack.
Saniflo recommends to use PVC, CPVC, copper.
Depending on the pump model, the discharge pipe can be 3/4 or 1 inch diameter pipe. The Sanicubic range uses 1-1/2" diameter discharge pipe.
It is not recommended to use an air admittance valve or a mechanical spring-loaded device as they only allow air to flow one way.
All of Saniflo products require an 1-1/2 inch vent pipe, which must be vented to the main vent stack as per plumbing codes. The Sanicompact 48 and Sanistar models do not require a vent connection since they are considered self contained units.
It is not recommended to use an air admittance valve or a mechanical spring-loaded device as they only allow air to flow one way.
Maintenance is not required for any of our products. However, we recommend the use Saniflo's Descaler which acts as a cleanser and descaler.
All of our products come with a plug power cord and requires 115 volts. They must be plugged into a GFI receptacle which does not have to be a dedicated circuit. The Sanicubic 2 requires 220/240 volts and must be hard wired.
A macerating pump is designed to handle the flush of human waste and toilet paper only (Sanitop, Saniaccess3, Saniplus, Sanipro, Sanipack, Sanicompact and Sanistar).
A grinder pump is designed to handle the flush of human waste, toilet paper and sanitary napkins such as feminine hygiene products (Sanibest Pro, Sanigrind Pro, Sanicubic 1 and Sanicubic 2).