DriTac Introduces New & Improved MCS 7000, Two-Part Epoxy, Concrete Moisture Control System
Manufactured in the USA, DriTac New & Improved MCS 7000 consists of a two-component epoxy (Component A (1-gal) and Component B (.79 gal)), which are mixed to form a coating that is applied to the surface of the concrete subfloor. The system offers a superior perm rating and enhanced moisture warranty when used with approved DriTac flooring adhesives for residential and commercial applications.
This easy-to-mix and apply formula allows for same-day installations with a 6-hour cure time. New & Improved MCS 7000 can be roller, squeegee or trowel applied with a coverage rate of 300-350 square feet/mixed unit. It is easy to clean when wet and colored green for easy identification. This user-friendly solution can also serve to isolate old cutback adhesive residue.
This premium-grade moisture control system has been certified by the Carpet and Rug Institute’s Green Label Plus Program for Indoor Air Quality. It touts DriTac’s “green” certification, designated for flooring installation solutions that contain zero VOC and zero solvents. New & Improved MCS 7000 also helps contribute to LEED credits, will not promote the growth of mold and has low odor.
DriTac Flooring Products, LLC is celebrating over 60 years as one of the most experienced manufacturers of environmentally friendly flooring installation solutions in the market. DriTac is committed to manufacturing sustainable products for the flooring industry with a comprehensive line of premium “green” zero VOC and zero solvent adhesives and installation products that help contribute points towards LEED certification. For more information or to receive a complete DriTac product guide, contact: John Lio, 60 Webro Road Clifton, N.J. 07012; Ph: 973-614-9000 ext. 243; e-mail: jlio@DriTac.com; or Web: www.DriTac.com.
Related News
Wednesday, April 24, 2024
November 2022: Sika-DriTac is introducing DriTac 5800 ToughBond, a new pressure sensitive resilient flooring adhesive designed for the interior installation of...read more
DriTac Flooring Products, LLC, has announced a new distribution partnership with Fishman Flooring Solutions, a Baltimore, Maryland-based flooring and installation supply distributor that has served the flooring industry for over...read more
August 2020 - DriTac Flooring Products, LLC has named David Clarkson President. Clarkson has held numerous positions with DriTac since 2003, most recently as Senior Vice-President – Sales. He has held key positions in the flooring industry for the past 30 years including...read more
June 2020 - DriTac Flooring Products, LLC has launched DriTac 8801 CoverGuard, a premium-grade 1.85mm semi-ridged foam that provides scratch and dent protection for newly installed floors and existing surfaces to prevent...read more
September 2019 - DriTac Flooring Products, LLC has launched DriTac 2000 Vertical, a polymer-based adhesive designed for interior wall applications. This instant grab adhesive provides superior bond strength for...read more
June 2019 – DriTac Flooring Products is introducing the 8400 EnviroTread series, a line of sustainable green, acoustical abatement recycled rubber flooring underlayment, made from post-consumer and...read more